Home CheckerCoverage APIRevit Add-in AboutSources Methodology Run a check →
Log in Sign up free
Municipal compliance intelligence

Check every parcel.
Cite every rule.
Before you build.

Codecheck runs your project against the U.S. municipal codes, pass, fail, or needs-review on every applicable rule, each one citing the exact article and section. No paraphrase, no summary.

525+
Jurisdictions
15
States live
6,875+
Zoning districts
100%
Source‑cited
Source‑cited results 15 states live Results in seconds No account required 18 compliance categories IBC · NEC · IECC aware
Coverage you can see

Real parcels. Real codes. Real citations.

Every check is grounded in the physical world it governs, the parcel, the building, the site, and backed by the exact ordinance text.

Aerial view of residential parcels
// Aerial parcel layer

Setbacks & lot geometry, parcel by parcel

Front, side and rear setbacks, lot coverage, frontage and height, mapped to the parcel you’re building on.

Modern building facade
// Building code

Height, egress & occupancy

The adopted IBC, NEC and IECC edition for each jurisdiction, not a national guess.

Construction site
// Site development

Parking, landscaping & signage

The full site check, ratios, screening, fences and signs, in a single pass.

The problem we're solving

See the problem we set out to fix

A quick look at why compliance research is slow and error-prone today, and how Swiftcon Codecheck changes it.

Try it free, no signup View coverage →
The problem

Compliance research burns hours your team doesn't have

The U.S. has thousands of municipalities, each with its own zoning code, building amendments, and local interpretations. The current process is manual, fragmented, and expensive.

Stacks of plans and ordinances
⏱

Hours lost to PDF research before every project

Project planners, engineers and architects spend hours digging through hundred-page zoning PDFs to answer basic questions before a project can start, questions that should take seconds.

⚠️

Missed requirements become expensive change orders

A single missed setback or parking ratio discovered during plan review means redesign, resubmittal, and schedule delays. Avoidable compliance errors cost the U.S. construction industry billions annually.

📋

Summaries go stale, and nobody has the source

Third-party summaries and internal cheat sheets go out of date silently. When an inspector quotes the ordinance, nobody has it. Codecheck always shows the source section so your team can stand behind every answer.

The solution

Compliance answers that cite every source, instantly

Codecheck checks your project parameters against the actual text of municipal codes and returns pass, fail, or needs-review for every applicable rule, with the exact article and section cited.

🏛

Actual ordinance text, not summaries

Every rule is sourced directly from the official municipal code. Citations include the exact article, section, and table number, the same citation a plan reviewer would use.

⚡

Results in seconds, not hours

Enter your project parameters and get a complete pass/fail breakdown across dimensional, MEP, building code, use, and site rules, no PDF-digging required.

🗺

Growing coverage across the United States

Now covering 525 jurisdictions across 15 states, and scaling nationally. Counties, cities, and villages, each with their own district structures and local amendments, all in one platform.

🔌

API and Revit add-in for seamless integration

Integrate compliance checks into your estimating, BIM coordination, or project management workflows via REST API or the native Revit plugin, no context switching required.

Aerial city grid under review
✓ PASSED
Front setback: 25 ft ≥ 25 ft minimum
Article II, Table II-2 · §155-3.30
Industry impact

Why this changes the way construction teams work

The construction industry loses hundreds of billions annually to avoidable rework, plan review failures, and compliance delays. Codecheck is designed to eliminate the most preventable category of that loss.

$273B
Annual rework cost in U.S. construction
Industry research estimates that 30% of construction costs are tied to rework, a significant portion of which stems from avoidable compliance errors caught too late.
14-21
Days lost per compliance-related resubmittal
A single missed zoning requirement found at plan review can delay project start by 2-3 weeks while redesign and resubmittal happens, cascading across the entire schedule.
6,875+
Zoning districts checked in under 30 seconds
What used to take a VDC coordinator 45+ minutes of PDF research now takes under 30 seconds, with a complete, source-cited audit trail that can be shared instantly.
18
Compliance categories per jurisdiction
Dimensional, MEP equipment, accessory structures, ADU, site development, fences, parking, signs, landscaping, building codes, nonconformity, use permissions, and more.
100%
Source-cited results, every time
Every pass or fail links directly to the article and section of the ordinance. No black-box answers. No trust required. Just the text, exactly as it appears in the municipal code.
50+
States in our national expansion roadmap
Fifteen states and growing. Codecheck is architected for national scale, the same extraction methodology that covers 525 jurisdictions works for any municipality in the U.S.
Who we serve

Built for every professional who touches compliance

Whether you're coordinating BIM models, estimating a bid, designing a site plan, or reviewing drawings, Codecheck gives you the ordinance knowledge you need without the research hours.

Construction and mechanical work🏗

MEP Contractors

Verify equipment placement, mechanical setbacks, rooftop screening requirements, and building code amendments before detailing begins, across any jurisdiction in our 15-state coverage area.

Modern building facade📐

Architects & Designers

Check setbacks, heights, lot coverage, parking ratios, and sign ordinances for any covered municipality before schematic design is complete, with source citations ready for submittals.

Aerial residential development💼

Developers & Owners

Validate site feasibility, understand what's permitted by right versus special use, and surface compliance issues before due diligence closes, at a fraction of the cost of a code consultant.

Blueprint drawings💻

VDC & BIM Professionals

Integrate compliance checks into Revit workflows and coordination pipelines via the native plugin or REST API. Import drawing data and run checks without leaving your BIM environment.

Our purpose

A vision for transparent, accessible compliance, nationwide

Codecheck exists to close the gap between the ordinance text and the field team, so that every contractor, architect, and developer operates with the same information that inspectors have always had.

Vision

A construction industry where no project stalls because of an unanswered code question

We believe that access to municipal code information should be instant, precise, and free of ambiguity. Codecheck exists to make the knowledge gap between ordinance text and field execution disappear, starting with 15 states and expanding nationally in the U.S.

Mission

Make every compliance result cite its source, always, without exception

Our mission is to digitize, structure, and surface U.S. municipal ordinances so that project teams can get verified compliance answers in seconds, with citations back to the exact section of law. We never paraphrase. We never summarize and omit. Every result we return shows you exactly where the rule lives in the code, because that's what real compliance requires.

Coverage

525 jurisdictions live, and growing nationally

We started in Illinois. Our extraction methodology is designed to scale to any U.S. municipality. New jurisdictions are added every month.

View full coverage → 525 jurisdictions live · 4 coming soon · national expansion in progress
How it works

Four steps from ordinance to answer

01

Select jurisdiction

Choose from 525+ covered U.S. jurisdictions. Each has its own district structure, zoning rules, and local building code amendments.

02

Enter project details

Input lot dimensions, setbacks, building height, parking count, equipment placement, and any other parameters you want checked.

03

Get instant results

Codecheck checks your inputs against up to 18 compliance categories and returns pass, fail, or needs-review for every applicable rule.

04

Read the citation

Every result cites the exact article, section, and table of the ordinance. Share it with your team, your client, or the plan reviewer.

Live demo

Try it right now, no account needed

Enter a few project parameters and see real results with real citations from the actual ordinance.

Project parameters

Research prototype · Not a substitute for formal plan review
Full 18-category check available in the Checker →

📋

Fill in the form and click "Check compliance" to see real results with source citations from the actual ordinance.

Ready to run your first check?

Full multi-jurisdiction compliance checking, free to use. No account required. Every result cites the source ordinance section.

COVERAGE

15 states · 525+ jurisdictions · growing

Deep coverage across the Midwest and Mountain West. Every result cites its source ordinance section.

🌽Illinois
209
jurisdictions · 2,542 districts
IBC 2018 · NEC 2023 · IECC 2021
🎸Missouri
78
jurisdictions · 1,084 districts
No statewide code · IPC · Zone 4-5A
🌾Kansas
53
jurisdictions · 801 districts
No statewide code · Local NEC · Zone 4-5A
🌻Nebraska
29
jurisdictions · 466 districts
IBC 2018 · NEC 2023 · IECC 2021 · UPC
🏎️Indiana
39
jurisdictions · 573 districts
IBC 2012 · NEC 2008 · 675 IAC
⛰️Wyoming
25
jurisdictions · 339 districts
IBC 2024 · NEC 2023 · IPC · Zone 5B-7
🌽Iowa
21
jurisdictions · 343 districts
IBC 2024 · NEC 2020 · UPC · Zone 5-6A
🦅South Dakota
15
jurisdictions · 196 districts
NEC 2023 · UPC 2024 · Zone 6A
🏇Kentucky
11
jurisdictions · 151 districts
IBC 2015 · NEC 2023 · 815 KAR · Zone 4-5A
🏔️Montana
25
jurisdictions · 289 districts
IBC 2021 · NEC 2020 · Zone 6B-7
🤠Texas
4
jurisdictions · 15 districts
Newly added · expanding
🏈Alabama
4
jurisdictions · 16 districts
Newly added · expanding
🌰Ohio
4
jurisdictions · 20 districts
Newly added · expanding
🚗Michigan
4
jurisdictions · 17 districts
Newly added · expanding
🧀Wisconsin
4
jurisdictions · 23 districts
Newly added · expanding
Why cross-state code knowledge matters
Electrical gap: Indiana (NEC 2008) vs Nebraska & Wyoming (NEC 2023), 15-year difference across neighboring states.
Plumbing split: Iowa, Nebraska, South Dakota use UPC. Illinois, Indiana, Kentucky, Missouri, Wyoming use IPC. Different venting rules.
No-code states: Kansas and Missouri have no mandatory statewide building code. Local adoption only, varies city by city.
Climate range: Zone 4A (Kentucky/Kansas) to Zone 7 (Jackson WY, −25°F design temp), broadest range in any regional dataset.
Full coverage details →
Codecheck AI Ask anything about jurisdictions & zoning rules
👋 Hi! I have zoning and building code data for 525 jurisdictions across 15 states. Ask me about setbacks, parking ratios, ADU rules, adopted building codes, or anything else in the dataset.